|
|
JEM Resin
Cold Pour
• Low viscosity (very searching, no voids, easier
mixing)
• Easy mixing at low ambient temperatures (e.g. -15°C)
• Curing reaction not sensitive to moisture (will cure under
water)
• Filled joints may be energised immediately if undisturbed
• Supplied in clear pouches which allows mixing to be observed
in process
• Excellent adhesion to XLPE, PVC, Lead etc.
• Type approved in LV joints (ENA TS C81/3 and BS EN 50393).
• Tested in accordance with HD631.1
• Re-enterable version available
CGBUJEM200P = Jem 1x
CGBUJEM600 = Jem 9x
*Technical
data subject to change without notice |
